CONDENSED EQUIPMENT SPECIFICATIONS

MODEL VT-1800 H C (NO Heater)

• 37 gpm, Closed-loop Negative Pressure System, .75 HP Pump
• Digital Dual Readout Temperature Controller
• Circuit Breaker on Incoming Power
• Motor Starter Relay
• Electronic Overload Protection on Motor
• Pump Reversal Protection with Indicator Light (Phase Monitor)
• Avail.Voltages: 208-240/8 Amps,460-480/4 Amps,(120 volt control circuit)
• All Electrical Components are UL/CE Rated
• Pre-vac Switch(to prevent unwanted pressure to the mold before start-up)
• Liquid Filled Gauges: TO MOLD, FROM MOLD, COOLING SUPPLY, AIR SUPPLY
• Copper and Bronze Plumbing
• An estimated 4 Gallon Stainless Steel Reservoir Tank
• Automatic Filling (filling and maintaining fluid level)
• Logic’s Air Separation & Removal System with Indicator Lights
• 3.2 Sq. Ft. Heat Exchanger
• Powder Coated, Ventilated Steel Cabinet
• Bonded Rubber Casters
• Post sizes: 1-1/4” NPT: TO MOLD, 1” NPT: FROM MOLD,
  3/4” NPT: AIR, RESERVOIR and COOLING and COOLING RETURN

CABINET: L:14" W:24" H:33"  WEIGHT:  180 lbs.

Approximate Ship Weight 210 lbs
Approximate Ship Size: 25"L x 40"W x 37"H 
Ships: Class 85, Common Carrier
H.S.Code: 8479.80.000

Specifications subject to change without notice. "Vac-U-Temp" is a trademark of Logic Corporation. Vac-U-Temp temperature controller/leakstopper U.S.Patent #4,287,941.