CONDENSED EQUIPMENT SPECIFICATIONS

MODEL VT-2600 Vac-U-Temp

• 50 gpm, Closed-loop Negative Pressure System, 1.5 HP pump
• Digital Dual Readout Temperature Controller
• Circuit Breaker on Incoming Power
• Motor Starter Relay
• Electronic Overload Protection on Motor
• Pump Reversal Protection with Indicator Light (Phase Monitor)
• Avail.Voltages:208-240/8 Amps, 460-480/4 Amps(120 volt control circuit)
• All Electrical Components are UL/CE Rated
• Pre-vac Switch(to prevent unwanted pressure to the mold before start-up)
• Liquid Filled Gauges: TO MOLD, FROM MOLD, COOLING SUPPLY, AIR SUPPLY
• Copper and Bronze Plumbing
• An estimated 5 Gallon Stainless Steel Reservoir Tank
• Automatic Filling (filling and maintaining fluid)
• Low Watt Density Heaters (260°F w/Approved Heat Transfer Fluids) 
• Logic’s Air Separation & Removal System with Indicator Lights
• 3.2 Sq. Ft. Heat Exchanger
• Powder Coated, Ventilated Steel Cabinet
• Bonded Rubber Casters
• Port sizes: 1-1/4” NPT: To MOLD, FROM MOLD,
  3/4" NPT: AIR/RESERVOIR/COOLING SUPPLY and COOLING RETURN

CABINET: L:14" W:24" H:34"  WEIGHT:  210 lbs.

Approximate Ship Weight: 250 lbs
Ship Size / Skid : 30"L x 40"W x 39"H
Ship: Class 70, Freight Carrier Do Not Stack
NMFC#133300

Specifications subject to change without notice. "Vac-U-Temp" is a trademark of Logic Corporation. Vac-U-Temp temperature controller/leakstopper U.S.Patent #4,287,941.